Carpet Extraction Detergent: 10 Litres a Sachet
Professional carpet cleaning stands or falls on accurate dilution. Get it wrong and you leave tacky residue, stress the machine and waste chemical. A pre-dosed carpet extraction detergent removes that guesswork completely. One sachet drops into the solution tank and makes a measured ten litres. Storage bulk falls, and results stay consistent from one site to the next.
Facilities teams clean communal carpet on tight windows and tighter budgets. Operatives rarely have time to measure concentrate by jug. Heavy five-litre bottles also eat van payload on multi-site rounds. So how does a pre-dosed sachet system remove dosing errors and still lift embedded soil from commercial fibre?
Key Takeaways
- Each soluble sachet makes ten litres of working solution, which removes manual measuring and the chemical waste that follows it.
- One carton of thirty sachets yields three hundred litres of solution, enough for an extensive multi-site extraction programme.
- Low-foam chemistry protects the vacuum motor from moisture damage and keeps recovery tanks clear during long cleaning cycles.
- The powder stays sealed inside water-soluble film, so the diluted working solution carries no CLP hazard classification for staff.
- Concentrated powder manufactured in West Yorkshire cuts packaging and transport bulk compared with conventional bottled liquid cleaning chemicals.
Commercial Carpet Extraction Chemical Overview
Chemical comparison works best on the cost of applied solution, not the price on the drum. Pre-dosed sachets fix the dose for a standard ten-litre extraction tank. That control lets a facilities manager forecast spend building by building. It also stops operatives from putting more chemical into the pile than the carpet needs.
The soluCLEAN range replaces liquid drums with dissolvable powder in a compact carton. Yield per pack is high and packed weight is low. The table below sets out sachet count, dose, yield and cost per fill across the core floorcare lines. Carpet extraction sits within that wider sachet range.
| Product Specification | Sachets per Pack | Litres per Sachet | Cost per 10L Fill | Total Solution per Pack |
|---|---|---|---|---|
| Product SpecificationSoluCLEAN Carpet Extraction Detergent (SCFS30CEP) | Sachets per Pack30 | Litres per Sachet10 L | Cost per 10L Fill£0.63 | Total Solution per Pack300 L |
| Product SpecificationSoluCLEAN Neutral Scrubber Dryer Cleaner (SCFS30NCP) | Sachets per Pack30 | Litres per Sachet10 L | Cost per 10L Fill£0.40 | Total Solution per Pack300 L |
| Product SpecificationSoluCLEAN Hard Surface Floor Cleaner (SCFS50HSP) | Sachets per Pack50 | Litres per Sachet10 L | Cost per 10L Fill£0.20 | Total Solution per Pack500 L |
| Product SpecificationSoluCLEAN Heavy Duty Scrubber Dryer (SCFS30HDPF-30L) | Sachets per Pack30 | Litres per Sachet30 L | Cost per 10L Fill£0.40 | Total Solution per Pack900 L |
Machine Tank Dosing and Solution Yield
Tank Dosing Without Measuring Jugs
Operatives often ask how much detergent for a carpet extraction machine each tank actually needs. The answer here is one sachet to ten litres of clean water. The film dissolves in about thirty seconds. No jug, no pump and no guesswork sit between the operative and a correct dose.
Over-concentration is the most common cause of sticky residue in commercial pile. Removing the pour removes that risk. In practice, we find dosing drift appears within days of a new operative joining a round. A fixed sachet dose holds the ratio steady across every shift and every site.
Three Hundred Litres From One Carton
A carton of thirty sachets produces three hundred litres of working solution. That covers a substantial extraction programme across a corporate estate. Teams finish the round without returning to a central depot for more chemical. Stock planning becomes a simple count of sachets against planned floor area.
Three hundred litres of ready-mixed liquid means sixty bottles at five litres each. The carton weighs a few hundred grams instead. Contract cleaners store a month of chemistry in a van compartment or a client cupboard. Shelf space in janitorial stores stays free for consumables that cannot be concentrated.
Foam Control and Extractor Performance
Why Low Foam Chemistry Protects Extraction Motors
Low foam is a mechanical requirement in carpet extraction, not a preference. Foam that reaches the recovery chamber can enter the vacuum motor intake. Moisture there causes electrical failure and internal corrosion. Motors then fail early, and a replacement costs far more than the chemical ever saved.
The soluCLEAN formulation suppresses foam in the solution lines and in the recovery tank. Airflow through the machine stays strong across long cleaning cycles. Technicians empty fewer frothy tanks. Separate defoamer, which many sites buy by the case, becomes unnecessary.
Residue Prevention and Fibre Resoiling
Many liquid detergents carry surfactant loads that cling to synthetic fibre. Extraction wands cannot rinse all of it out. The residue left behind stays slightly tacky. It then grips dry soil from foot traffic, and the carpet greys within days of a clean.
Controlled carpet cleaning detergent sachets rinse cleanly from both pile and backing under steady passes. Retail and office carpet holds its appearance for longer as a result. Intervals between restorative cleans stretch out. The maintenance budget then buys fewer deep cleans each year.
Did You Know?
Regulation 7 of the Control of Substances Hazardous to Health Regulations 2002 puts prevention of exposure first. Control is permitted only where prevention is not reasonably practicable. Substitution for a safer form ranks above personal protective equipment. The statutory hierarchy treats PPE as a last resort.
Fabric Care and Multi-Surface Versatility
Protection for Delicate Commercial Carpet Fibres
Commercial extraction needs chemistry that lifts ground-in soil without attacking the yarn. Caustic cleaners strip protective coatings from carpet fibre. The pile then crushes permanently and wears faster under heavy footfall. A balanced formulation avoids that damage whilst still releasing oily soil from the fibre surface.
This powder breaks the electrostatic bond between greasy soil and the carpet strand. Woven carpet, needle-punch tile and tufted nylon all tolerate it. Facilities managers running mixed flooring can standardise on one product. Dye bleed and fibre degradation stay off the risk register.
Upholstery Cleaning and Targeted Stain Extraction
Cleaning teams rarely clean floors alone. Fabric office chairs, reception seating and vehicle interiors sit on the same job sheet. The same sachet solution works through hand tools and portable spot machines. Gentle chemistry suits upholstery fabric, so no second product needs space in the van.
The powder dissolves in warm or cold water. Operatives mix a small batch in a bucket for a single stain. Apply it, agitate with a brush, then extract the suspended soil. Fabric comes up touch-dry and free of residue that would attract soil again.
60 Litre Free Trial
Request your free 60 litre sample of Heavy Duty Scrubber Dryer Solution
Claim Your Free Samples
Chemical Safety and COSHH Compliance
Powder Encapsulation and Diluted CLP Classification
COSHH compliance turns on operative exposure during dilution. The neat powder inside each sachet does carry a hazard classification. Operatives never open it. The water-soluble film goes straight into the tank, so hand and concentrate never meet at any point in the task.
Once dissolved, the working solution is Not Classified under CLP. Staff therefore handle no hazardous liquid at any stage. Splash risk from pouring a five-litre concentrate disappears. Risk assessments shorten, and site-level COSHH management becomes easier to evidence at audit.
Technical Documentation and Responsible Sourcing
Every chemical brought onto a client site needs supporting documentation. Operations managers must hold a safety data sheet and record the relevant workplace exposure controls. COSHH assessments depend on that paperwork. Without it, an auditor has no evidence that proper control measures were ever considered.
Solupak manufactures this line under controlled quality standards. The full method statement and safety data sheet for this product are still being finalised. Until the manufacturer publishes them, avoid quoting pH figures or efficacy certification. From experience across the sector, holding the generic range documentation on file is the sensible interim step.
Trade Accounts
Transform your purchasing with our enterprise-grade procurement tool.
Pay By Monthly Invoice
Multi-Site Operations and Logistics Efficiency
Multiple Contracts Served From Compact Sachet Packs
Chemical distribution breaks down first on scattered regional contracts. Five-litre jugs take up payload that machines and consumables need. They also clutter client janitorial cupboards. Worse, they leak in transit, and spilled concentrate inside a van is an expensive afternoon.
One carton of thirty sachets carries three hundred litres of capability. It fits in a hand caddy or a glove box. Mobile teams hold a full month of extraction chemistry on board. Van space then goes to the extraction machine itself, where it belongs.
Local Yorkshire Production and Environmental Footprint
Most liquid cleaning chemical is water. Shipping it moves weight that the customer already has on tap. That transport adds cost and carbon to every delivery. Concentrated powder takes the water out of the supply chain and leaves only active chemistry to move.
SoluCLEAN manufactures its sachet range in Castleford, West Yorkshire, close to the regional distribution network. The outer packaging is compostable, so single-use plastic containers leave the cycle entirely. Transport emissions fall with the packed weight. Waste handling at client sites also becomes simpler.
Equipment Acquisition
Buy Outright
Full warranty, immediate ownership
Acquire market-leading commercial machinery outright, with full manufacturer warranty and direct delivery from our Selby HQ to site.
Lease Finance
Tax-efficient lease from £24 pcm
Spread the cost over 2, 3 or 5 years with no-deposit leasing on machines over £1,000, plus same-day approval and 7-day UK delivery.
Short-Term Hire
Cover breakdowns and one-off jobs
Hire professional scrubber dryers, carpet extractors and steam cleaners from our Selby HQ for emergency cover or one-off project work.
Commercial Cleaning Cost Economics
Cost Per Working Litre in Practice
True cleaning cost sits in the price of applied solution, not the price of the carton. A carton of thirty extraction sachets costs £18.95 excluding VAT. That carton makes three hundred litres of ready-to-use solution. The arithmetic gives a fixed figure for every tank filled on site.
Each ten-litre machine fill works out at roughly 63p. Per litre of working solution, that is 6.3 pence. Ready-to-use liquids and badly dosed concentrates cannot match that transparency. Margin on a competitive facilities tender survives because the chemical line is known in advance.
Where Overdosing Drains the Cleaning Budget
Overdosing is the largest hidden cost in commercial cleaning. Operatives pouring by eye routinely use double or triple the stated ratio. Many believe a stronger mix cleans faster. It does not, and the residue it leaves brings the soil straight back into the pile.
Pre-dosed sachets take the dilution decision out of the shift entirely. Consumption becomes measurable: count sachets against the square metreage cleaned. Contract managers then hold chemical spend against the original tender estimate. Budget overruns stop arriving as a surprise at quarter end.
Built for Your Industry
Hygieia provides products and equipment into the three key UK sectors where cleaning standards run highest. Each card links to that sector’s compliance detail, recommended machines, and live case studies.
Facilities Management
Multi-site contractor support nationwide
Single rolling lease contract across all your customer sites. Replace machines as contracts win or lapse – no capital tied up.
Education & Schools
Safe corridors, term-time delivery slots
Quiet, slip-prevention scrubbers for corridors and halls. Term-time delivery slots designed not to disrupt teaching.
Healthcare & NHS
EN 14476 viral compliance for CQC sites
EN 14476-compliant chemistry and machines that meet Regulation 15 of the CQC cleanliness standards across NHS and care sites.
Wholesale Supply and Commercial Procurement
Flexible Trade Accounts for Facilities Teams
Floorcare procurement should not tie up working capital. A trade account gives trade pricing across the core cleaning lines. There is no fee to open one and no minimum monthly spend. Teams order what the round needs, when the round needs it, without paying up front.
Site orders consolidate onto a single monthly invoice sent to one contact. Accounts departments then reconcile one document instead of a stack of receipts. The arrangement works the same for a single office or a wider property portfolio. Ordering stays with the people who run the round.
Reliable Stock Fulfilment and Regional Distribution
Cleaning schedules fail when chemical arrives late. Full stock depth across the water-soluble sachet catalogue removes that risk. Orders placed before 2pm are dispatched the same day from the Selby distribution centre. Delivery then completes within two to three working days, Saturdays included.
Extraction chemistry can travel with machinery and wider janitorial consumables on one order. Deliveries go direct to an office, depot or operational site address. Pricing holds across every line, with no minimum order constraint. Replenishment becomes a routine task rather than a scramble.
Get a Trade Quote
Final Thoughts
A pre-dosed carpet extraction detergent changes routine carpet care in practical terms. Each sachet fixes the dose at ten litres. Chemical waste falls, foam stays under control, and residue stops pulling soil back into the pile. Technicians also stop carrying heavy liquid between contract sites.
Concentrated systems deliver savings well beyond the purchase price. Carbon reporting and waste reduction both improve once water stops travelling by road. Controlled dosing holds cleaning quality steady, protects the flooring asset and keeps operating margins predictable.
Frequently Asked Questions
Q: How much solution does one carpet extraction sachet produce?
A: One sachet makes exactly ten litres of working solution in clean water. The pre-measured powder removes any need for a measuring jug or a dosing pump on site. The film dissolves in roughly thirty seconds, so the tank is ready almost immediately. A full carton of thirty sachets yields three hundred litres. That volume covers an extensive programme of carpet and upholstery work across several contract locations.
Q: Will this detergent create excessive foam inside my extraction machine?
A: No. The formulation uses low-foam surfactants developed for commercial extraction equipment and upholstery machines. Foam control matters mechanically rather than cosmetically. Foam reaching the recovery chamber can enter the vacuum motor and cause moisture damage. With this chemistry, operatives do not need to add a separate defoaming agent to the recovery tank. Extraction cycles run cleanly, and the recovery tank does not overflow during heavy deep-cleaning work.
Q: Is the working solution safe for staff to handle under COSHH?
A: Yes. The concentrated powder inside the sachet carries a hazard classification, but the dissolvable film means operatives never touch it. Once fully diluted in water, the resulting solution is Not Classified under CLP. Direct contact with a hazardous concentrate is therefore removed from the task. Splash hazards from pouring liquid concentrate disappear as well. Site-level COSHH management becomes simpler, whilst supervisors still keep the product documentation on file.
Q: Can I use this extraction detergent on fabric upholstery?
A: Yes. The chemistry is gentle on delicate textile fibre and works on commercial upholstery, office chairs and vehicle seating. Operatives can mix the solution in a bucket or in a machine tank. Application through a hand wand or a portable extraction tool is straightforward. The solution rinses cleanly and leaves no sticky detergent film behind. Treated fabric therefore stays presentable for longer and does not resoil within days.
Q: How quickly can I receive delivery of soluCLEAN extraction sachets?
A: Orders placed before 2pm are dispatched the same day from the Selby warehouse. Standard delivery completes within two to three working days, including Saturdays. Consignments go direct to an office, a depot or an operational site address. A free trade account gives access to the full soluCLEAN range with no minimum order value. Stock depth across the sachet catalogue keeps repeat orders on the same schedule.